Job Opportunities in Saudi Arabia
May 15, 2024
Air Products
جازان
Process Engineer - Power Block
At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the world.
Reimagine What’s Possible
Purpose
The Process Engineer is responsible for supporting the process team for the process design, operation, implementation, and commissioning of Power Plant. The job purpose is mainly to understand and improve industrial processes to increase efficiency, reduce cost, improve sustainability/reliability, and maximize profitability for JIGPC facilities in Jazan, Saudi Arabia.
Nature & Scope
The Process Engineer, reporting to Lead Process Engineer, provides support to the Lead Process Engineer in accelerating the commissioning activities from Power Plant Process side with proactive approach in looking ahead to the planned activities. The role identifies productive ideas, develops projects, and supports the project execution team in implementation of MOCs for the Power facility
1.A Bachelors degree in Mechanical, Electrical or Chemical Engineering with 10 years’ experience in Engineering, Process or Power Plant Operations in a technical role.
2.Detailed know-how of whole Combined Cycle Power Plant steam system, design & philosophy
3.Good operating knowledge to understand the pre-requirements of start-up, shut down, and impacts of load variations.
4.Experience in execution of Reliability Run Test Programs previously.
5.Experience in Commissioning of Power Plant from Process side.
6.Also understand the requirements of process safety systems, including relief devices, and safety instrumented systems.
7.Experience on specifically SIEMENS Gas Turbines, HRSGs, Steam Turbines and any safety Certification (NEBOSH, IOSH) would be a plus.
8.GULF experience will be preferred.
9.Balanced multi-discipline understanding in process engineering, DCS controls, process safety and equipment design.
10.Effective communication skills and a willingness to seek out cross-functional technical expertise as required, with a proactive approach to problem solving.
We are the world’s largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future.
At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products.
Reimagine What’s Possible
Purpose
The Process Engineer is responsible for supporting the process team for the process design, operation, implementation, and commissioning of Power Plant. The job purpose is mainly to understand and improve industrial processes to increase efficiency, reduce cost, improve sustainability/reliability, and maximize profitability for JIGPC facilities in Jazan, Saudi Arabia.
Nature & Scope
The Process Engineer, reporting to Lead Process Engineer, provides support to the Lead Process Engineer in accelerating the commissioning activities from Power Plant Process side with proactive approach in looking ahead to the planned activities. The role identifies productive ideas, develops projects, and supports the project execution team in implementation of MOCs for the Power facility
PRINCIPAL ACCOUNTABILITIES
Safety:
Safety:
- Maintain a safe work environment. Demonstrate leadership with all company & industry safe work processes to prevent all types of injuries. Ensure proper documentation is maintained for safety related activities.
- Provide technical guidance, working with the commissioning team, assisting in the commissioning, startup, and troubleshooting activities.
- Support and participate in all commissioning activities including Commissioning Engineering Support, Commissioning and Startup Procedure Review and Pre-Startup Safety Review.
- Support reviews of process safety hazards prior to startup including providing input for reviewing Safety Integrity Level(SIL) assessments and Layer Of Protection Analysis;
- Support field validation of SIS and DCS systems with Control and Process Control engineers;
- Help support control room operations during first start-up to guide Operations and ensure safe startup;
- Provide engineering support to identify the performance gaps, troubleshoot problems, and develop solutions to resolve plant operating issues.
Develop and perform the performance testing program for the facility following successful startup.
JOB REQUIREMENTS
- Provide technical support for developing and driving improvements to meet financial targets.
- Provide process safety support, including technical and safety reviews for changes to the plant.
- Provide effective interfaces with technical functions in other departments and operations.
- Support development and execution of minor projects and plant modifications and expansions.
- Provide engineering technical support to maintain safe, efficient, smooth, and reliable plant operations of the plant.
- Perform process simulations as needed.
- Provide support in process documentation and operating instructions.
- Provide technical support to the Operations team providing guidance for the operation of the facilities and units as prescribed by the Work Instruction Procedures.
- Provide process safety support in the developing and reviewing of Management of Change Notices. Coordinate with engineering departments and EPC process safety personnel as required for technical support.
- Provide technical support & guidance during the commissioning of the plants. Assist Operations in maintaining accurate document control and monitor quality assurance initiatives.
- Provide technical support to ensure the safe and reliable operation of equipment, processes, utilities, and controls is achieved.
- Participating in troubleshooting activities for Root Cause Investigations and technical reviews as required.
- Provide process guidance for advanced control initiatives.
- Ensure the facility under commissioning is operated not to exceed Environmental and Regulatory requirements.
- Provides process engineering leadership to drive asset performance which includes, troubleshooting, plant efficiency, process safety, equipment reliability, advanced controls, asset management and productivity project identification, development, and execution support.
- Participate in the training of the Operations team up to plant commissioning.
- Provide process engineering support to the operations to effectively operate the facilities and units to meet the customer’s satisfaction on safety, reliability, product quality, and flexibility of product supply while in compliance of contractual requirements.
- Support & maintain close working relationships with engineering, operations, and maintenance personnel to continuously monitor & evaluate plant systems & equipment.
- Provide technical support for Advanced Controls initiatives.
1.A Bachelors degree in Mechanical, Electrical or Chemical Engineering with 10 years’ experience in Engineering, Process or Power Plant Operations in a technical role.
2.Detailed know-how of whole Combined Cycle Power Plant steam system, design & philosophy
3.Good operating knowledge to understand the pre-requirements of start-up, shut down, and impacts of load variations.
4.Experience in execution of Reliability Run Test Programs previously.
5.Experience in Commissioning of Power Plant from Process side.
6.Also understand the requirements of process safety systems, including relief devices, and safety instrumented systems.
7.Experience on specifically SIEMENS Gas Turbines, HRSGs, Steam Turbines and any safety Certification (NEBOSH, IOSH) would be a plus.
8.GULF experience will be preferred.
9.Balanced multi-discipline understanding in process engineering, DCS controls, process safety and equipment design.
10.Effective communication skills and a willingness to seek out cross-functional technical expertise as required, with a proactive approach to problem solving.
We are the world’s largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future.
At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products.
We regret to inform you that this job opportunity is no longer available
Latest Job Opportunities
October 19, 2024
AL HADA CONTRACTING COMPANY
Civil Engineer (Saudi or Arab)
الرياض
FULL TIME
View Details
October 19, 2024
Mansard Riyadh, a Radisson Collection Hotel-Rooms
Nail Technician
الرياض
FULL TIME
View DetailsSimilar Jobs
September 11, 2024
John Wood Group
TPE VI / Consultant Process Engineer
الخبر
FULL TIME
View Details
September 10, 2024
SABIC - Saudi Basic Industries Corp.
Engineer, Process Safety
الجبيل
View Details
September 10, 2024
SABIC - Saudi Basic Industries Corp.
Engineer, Advanced Process Control
الجبيل
View DetailsNew Jobs from This Company
September 30, 2024
Air Products
Senior Marketing & Communications Specialist
الظهران
FULL TIME
View Details