Job Opportunities in Saudi Arabia
May 15, 2024
Air Products
جازان
FULL TIME
Instrumentation & Control Engineer - Utilities
At Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the world.
Reimagine What’s Possible
Purpose
To provide Instrument & Controls engineering oversight to ensure the working and safe & reliable operation of IGCC plant facilities under JIGPC in Jazan, Saudi Arabia.
Nature & Scope
The Jazan IGCC is the world’s largest IGCC and ASU facility producing 2100 MMSCFD syngas, 18,000 MT/Day Oxygen and 4 Gigawatts of power. Facilities and assets include; residue gasification, acid gas clean up (Rectisol), soot ash recovery, sulphur recovery (Claus & Scot), combined cycle power plants, materials handling systems, hydrogen recovery, air separation, water utilities systems and waste water treatment facilities.
Properly functioning Instrumentation & Controls are critical to the safe, reliable, and efficient operation of the plant facilities and associated equipment & systems. As a member of the site engineering team, the Senior Instrument Engineer will lead to interact routinely with plant operations, maintenance, and other engineering personnel to provide “hands-on” field-engineering & troubleshooting support, instructions, and technical guidance related to the site’s Instrumentation & Controls systems. The position emphasizes teamwork, communications, organization, change management, work process optimization, planning, leadership, and hands-on technical skills with comprehensive knowledge across other engineering disciplines.
PRINCIPAL ACCOUNTABILITIES
Safety
You will provide process control engineering technical input and task leadership across the following:
JOB REQUIREMENTS
Engineering graduate BS in Electrical Engineering with >10 years of relevant experience in Commissioning and running Oil and Gas plants. Minimum 3-5 years experience in commissioning plants. Experience in Front end Loading engineering project development. Demonstrated “hands-on” ability to configure, calibrate, troubleshoot, and repair various plant process instrumentation related to temperature, pressure, flow, voltage, and other plant process variables. Experience with Siemens PCS7 and Honeywell Experion Distributed Control system (DCS), field instrumentation, gas analyzers, and control valves. A fundamental understanding of computer networks is desirable. Candidates should also possess demonstrated troubleshooting and problem-solving skills, and an ability to think logically and systematically. Knowledge & understanding with the principles of: Safety Integrity Level (SIL), Safety Instrumented System (SIS), Safety Instrumented Function (SIF), Supervisory control and data acquisition (SCADA) Knowledge of industry codes and standards applicable to Oil and Gas and Refining Industries (API, ISA, NEC / IEC, NFPA, ASME, etc.) and preferably also Saudi Aramco standards and working practices. Experience in the following areas is highly desirable: Gas and Water Analyzers/sampling systems, Analog Controls, Logic Controls and Profibus. Emphasis placed on safety, teamwork, and aptitude toward challenging work. Skills related to outage planning, organization and communication are highly desirable. Proficiency in English speaking and writing. Good interpersonal and teamwork skills with the ability to communicate clearly and effectively throughout all levels within the organization. Experience in leading and guiding technical employees. Knowledge and understanding of local statutory / regulatory inspection requirements.
We are the world’s largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future.
At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products.
Reimagine What’s Possible
Purpose
To provide Instrument & Controls engineering oversight to ensure the working and safe & reliable operation of IGCC plant facilities under JIGPC in Jazan, Saudi Arabia.
Nature & Scope
The Jazan IGCC is the world’s largest IGCC and ASU facility producing 2100 MMSCFD syngas, 18,000 MT/Day Oxygen and 4 Gigawatts of power. Facilities and assets include; residue gasification, acid gas clean up (Rectisol), soot ash recovery, sulphur recovery (Claus & Scot), combined cycle power plants, materials handling systems, hydrogen recovery, air separation, water utilities systems and waste water treatment facilities.
Properly functioning Instrumentation & Controls are critical to the safe, reliable, and efficient operation of the plant facilities and associated equipment & systems. As a member of the site engineering team, the Senior Instrument Engineer will lead to interact routinely with plant operations, maintenance, and other engineering personnel to provide “hands-on” field-engineering & troubleshooting support, instructions, and technical guidance related to the site’s Instrumentation & Controls systems. The position emphasizes teamwork, communications, organization, change management, work process optimization, planning, leadership, and hands-on technical skills with comprehensive knowledge across other engineering disciplines.
PRINCIPAL ACCOUNTABILITIES
Safety
- Provide & maintain a safe work environment for self & others. Employ good housekeeping methods and demonstrate leadership with all company & industry safe work processes to prevent injuries.
You will provide process control engineering technical input and task leadership across the following:
- Lead in the provision of engineering evaluation & determinations, issue technical direction & guidance, and oversee inspection & quality assurance initiatives for all Instrument & Controls systems & equipment troubleshooting, maintenance, calibration, repair, and test activities.
- Lead in the provision of engineering support & guidance during the construction & commissioning of the plants. Maintain accurate document control and monitor quality assurance initiatives.
- Lead in the development of detailed engineering specifications (including sizing calculations) for the procurement of Instrument & Controls systems components and equipment.
- Lead in the provision of engineering input for development and maintenance of Instrument & Controls systems & equipment standards, procedures, best practices, inspection contracts, and contractor selection guidelines.
- Implement and maintain compliance with all Critical Safety Circuits (CSS), Safety Integrity Levels (SIL), and Safety Instrumented Systems (SIS) implementation and revalidation programs.
- Provide engineering support for the troubleshooting, maintenance, calibration, repair, and test activities for the plant’s gas analyzers.
- Develop, implement, and manage a comprehensive risk-based inspection and calibration program for all Instrument & Controls systems & equipment.
- Establish & maintain a relationship with the local inspection bureau, maintain relevant statutory, regulatory, technology standards, and code information consistent with JIGPC plant operational objectives.
- Establish & maintain compliance with all company and local regulations.
- Employ appropriate project development and project management activities (including scope, budget, schedule, execution strategies, risk plans, cost collection / reporting, etc.) for the execution of all projects and turnaround activities.
- Provide engineering support to develop the annual budget for Instrument & Controls systems & equipment maintenance, repair, and major turn-around activities.
- Promote an atmosphere of team spirit through good example, open communication, good listening, and timely problem resolutions.
- Drive continuous improvement in safety performance, reliability, and cost of quality goals.
- Establish & maintain relationships with regional Instrument & Controls systems & equipment suppliers
- Foster and support positive working relationships with internal and external customers.
- Participate at professional association meetings to determine best practices being used in the industry and apply them to our Instrument & Controls systems & equipment.
- Support, mentor, and develop local I&C engineers.
JOB REQUIREMENTS
Engineering graduate BS in Electrical Engineering with >10 years of relevant experience in Commissioning and running Oil and Gas plants. Minimum 3-5 years experience in commissioning plants. Experience in Front end Loading engineering project development. Demonstrated “hands-on” ability to configure, calibrate, troubleshoot, and repair various plant process instrumentation related to temperature, pressure, flow, voltage, and other plant process variables. Experience with Siemens PCS7 and Honeywell Experion Distributed Control system (DCS), field instrumentation, gas analyzers, and control valves. A fundamental understanding of computer networks is desirable. Candidates should also possess demonstrated troubleshooting and problem-solving skills, and an ability to think logically and systematically. Knowledge & understanding with the principles of: Safety Integrity Level (SIL), Safety Instrumented System (SIS), Safety Instrumented Function (SIF), Supervisory control and data acquisition (SCADA) Knowledge of industry codes and standards applicable to Oil and Gas and Refining Industries (API, ISA, NEC / IEC, NFPA, ASME, etc.) and preferably also Saudi Aramco standards and working practices. Experience in the following areas is highly desirable: Gas and Water Analyzers/sampling systems, Analog Controls, Logic Controls and Profibus. Emphasis placed on safety, teamwork, and aptitude toward challenging work. Skills related to outage planning, organization and communication are highly desirable. Proficiency in English speaking and writing. Good interpersonal and teamwork skills with the ability to communicate clearly and effectively throughout all levels within the organization. Experience in leading and guiding technical employees. Knowledge and understanding of local statutory / regulatory inspection requirements.
We are the world’s largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future.
At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products.
We regret to inform you that this job opportunity is no longer available
Latest Job Opportunities
October 19, 2024
AL HADA CONTRACTING COMPANY
Civil Engineer (Saudi or Arab)
الرياض
FULL TIME
View Details
October 19, 2024
Mansard Riyadh, a Radisson Collection Hotel-Rooms
Nail Technician
الرياض
FULL TIME
View DetailsSimilar Jobs
August 20, 2024
Air Products
Instrumentation & Control Engineer - Power Block
جازان
FULL TIME
View Details
June 13, 2024
Air Products
Senior Maintenance Engineer - Instrumentation & Controls
جازان
View Details
October 7, 2024
SABIC - Saudi Basic Industries Corp.
Engineer, Control System & Instrumentation
الجبيل
View DetailsNew Jobs from This Company
September 30, 2024
Air Products
Senior Marketing & Communications Specialist
الظهران
FULL TIME
View Details