Job Opportunities in Austria
August 26, 2024
Silicon Austria Labs
Villach
OTHER
CRYSTALLINE PhD position - Etching processes of thin film LiNbO3 on insulator for next generation nanophotonic platform on 200mm wafers (all genders) // Job-ID: 151-1
Your future responsibilities
The main goal of the project is to investigate the influence of plasma discharge parameters in inductively coupled conditions on etch performance and quality of Li Nb O3 based PIC structures. Simulation and modeling methods will be implemented to simulate the plasma process and to predict the etch trends and results. In addition, this project also includes etch mask selection and test structure design and test vehicle characterization. The final goal is the minimization of optical losses while simultaneously reducing PIC device footprint. In particular, the developed LNOI etching process should demonstrate:
1. Control of etch depth and width (CD), i.e., profile angle controls insertion loss.
2. Smooth sidewalls, that help minimize propagation losses.
3. Vertical sidewalls, that enable tighter bend radius and smaller footprint.
4. Up-scaling of the process to 200 mm wafers.
The etch process performance will be characterized by various available techniques including XPS, AFM, and SEM. The optical losses will also serve as an important figure of merit for fabricated PIC test structures.
The research will involve:
1. Control of etch depth and width (CD), i.e., profile angle controls insertion loss.
2. Smooth sidewalls, that help minimize propagation losses.
3. Vertical sidewalls, that enable tighter bend radius and smaller footprint.
4. Up-scaling of the process to 200 mm wafers.
The etch process performance will be characterized by various available techniques including XPS, AFM, and SEM. The optical losses will also serve as an important figure of merit for fabricated PIC test structures.
The research will involve:
- Working in the ISO5 clean room environment
- Performing experimental work on Plasma etching equipment
- Performing characterization
- Design of experiments
- Participation in plasma process simulation and modeling
- Writing reports and scientific papers
- Conference participation
Your profile
- Master's degree in physics, chemistry, micro/nanotechnology or related fields.
- Advanced knowledge in plasma physics/chemistry.
- Previous experience in plasma etch/CVD and micro/nano fabrication.
- Basic knowledge of plasma diagnostics tools (OES, RFEA).
- Characterization skills in at least two of the listed instruments: SEM, AFM, ellipsometry, profilometry.
- Knowledge of surface characterization techniques are required, and knowledge of III-N materials is an advantage.
- Excellent written and oral communication skills in English.
- Enthusiasm for independent developing of new ideas and a positive attitude towards new challenges.
- Optional: knowledge of COMSOL plasma module; CFD-ACE+.
Important Facts about SAL
- Application deadline: 3 November 2024
- Weekly working hours: 38.5
- Diversified research activities with plenty of technical challenges.
- State-of-the-art lab facilities and instruments.
- Internal and external training opportunities for further development.
- Home Office possible.
- € 4 per day food allowance in restaurants or € 2 per day in supermarkets.
- Family & kids friendly.
- Free coffee/milk/tea & fresh fruits.
Become part of Silicon Austria Labs
Application requirements:
- Applicants must not have resided and/or carried out their main activity (work, studies, etc.) in Austria for more than 12 months in the 3 years immediately before the call deadline.
- Master's degree including official evidence completed by application deadline.
- Not in possession of a Ph D degree.
- Only complete sets of application documents concatenated in a single PDF can be accepted.
- [Mandatory] 1-page letter of motivation (in English), including a declaration of the considered research topic
-
[Mandatory] CV (in English), including
- expertise, skills, and
- (if applicable) list of internships and publications & patents
- [Mandatory] Scanned copies of transcripts of records for bachelor and the master (or equivalent degree) including the diplomas proofing the completion of the studies (originally issued in English or German, or an official translation in alignment with the guidelines on translation and authentication)
- [Mandatory] Proof of fluency in English at minimum B2 level (Upper Intermediate English). Accepted proofs are e.g. master studies in English or an internationally accepted certificate.
- [Mandatory] Scanned copy of valid Passport/ID
- [Optional] Letter of references from academic reference persons (with contact details)
- [Optional] Authored/Co-authored publications
- [Mandatory] Master thesis
Apply for this job
About us
Silicon Austria Labs (SAL) is a top research center for Electronics and Software Based Systems (ESBS). At three locations (Graz, Villach, Linz), SAL is conducting research along the entire ESBS value chain in the areas of sensor systems, power electronics, intelligent wireless systems, microsystems and embedded systems to develop future-oriented solutions for industrial production, health, energy, mobility, safety and more. SAL brings together key players from industry, science and research and thus valuable expertise and know-how and conducts cooperative, application-oriented research along the value chain. Cooperative projects are co-financed by SAL and enable a fast and unbureaucratic project start. SAL is thus shaping the high-tech location Austria and Europe and developing the future
Innovation is our top priority and so are our employees. We are a family-friendly company and support the compatibility of work and family as much as possible. That is why we have been awarded the Work and Family Certificate until 2026. But we are constantly working on new measures to offer our employees an environment where they feel good, healthy and motivated.
We regret to inform you that this job opportunity is no longer available
Latest Job Opportunities
October 10, 2024
University of Innsbruck - Department of Public Finance
Research Associate (Ph.D. position) in Applied Microeconomics
Innsbruck
View DetailsOctober 10, 2024
alpha nova Betriebsgesellschaft mbH
Schulassistent:in WIKU Graz
Graz
OTHER
View DetailsOctober 10, 2024
alpha nova Betriebsgesellschaft mbH
Schulassistent:in für Grazer Schulen
Graz
OTHER
View DetailsOctober 10, 2024
alpha nova Betriebsgesellschaft mbH
Schulassistent:in Sr. Klara Fietz Privat Volksschule
Graz
OTHER
View Details
Similar Jobs
September 3, 2024
NXP Semiconductors
Student Position: Technical Product Marketing (f/m/d)
Gratkorn
OTHER
View DetailsAugust 26, 2024
Silicon Austria Labs
CRYSTALLINE PhD position - Solid state spin based quantum sensors with increased sensitivity (all genders) // Job-ID: 152-1
Villach
OTHER
View DetailsAugust 26, 2024
Silicon Austria Labs
CRYSTALLINE PhD position - Mid-infrared photonic integrated circuits for sensing applications (all genders) // Job-ID: 147-1
Villach
OTHER
View DetailsAugust 26, 2024
Silicon Austria Labs
CRYSTALLINE PhD position - Development of Magnetoelectric Thin Films Composites into Functional Devices (all genders) // Job-ID: 149-1
Villach
OTHER
View DetailsNew Jobs from This Company
September 25, 2024
Silicon Austria Labs
Master Thesis – Sustainable Coating Layer for Recycling Electronic Components (all genders) // Job-ID: 156-0
Villach
OTHER
View DetailsAugust 26, 2024
Silicon Austria Labs
CRYSTALLINE PhD position - Solid state spin based quantum sensors with increased sensitivity (all genders) // Job-ID: 152-1
Villach
OTHER
View DetailsAugust 26, 2024
Silicon Austria Labs
CRYSTALLINE PhD position - Mid-infrared photonic integrated circuits for sensing applications (all genders) // Job-ID: 147-1
Villach
OTHER
View DetailsAugust 26, 2024
Silicon Austria Labs
CRYSTALLINE PhD position - Development of Magnetoelectric Thin Films Composites into Functional Devices (all genders) // Job-ID: 149-1
Villach
OTHER
View DetailsAugust 21, 2024
Silicon Austria Labs
Scientist – Plasma Etching Process Development for Novel Materials (all genders) // Job-ID: 140-1
Villach
OTHER
View Details